A robust, easy to use plug and play turntable.

It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with pre-configured AT 3600 cartridge.

Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

• Plays 33 1/3 and 45 rpm Vinyl Records
• Thorens TP 71 Aluminum Tube Tonearm
• Gold-Plated Stereo RCA Out
• Integrated Switchable Phono Preamp
  

  ---

  Turntable section

  • Drive System: Belt Drive
  • Motor: DC Motor
  • Speed: 33 1/3 RPM, 45 RPM
  • Rotation Speed Variation: +/–2%
  • Wow and Flutter: 0.2%
  • Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF) / 60dB or higher (unweighted, 20kHz LPF)
  • Platter: Aluminum Die-cast
  • Diameter of Platter: 12″, 300mm

  ---

  Tonearm section: Alumi tube

  • Type: Static Balance, Straight
  • Effective Arm Length: 8.8″, 223.6mm
  • Stylus Pressure Range: 0 to 4g
  • Supported Cartridge Weight: 3.5 to 6.0g
  • Overhang: 18.6mm
  • Anti-skating Adjustment: Supported

   

  ---

  Cartridge section
  

  • Type: MM type (Audio-Technica AT3600)
  • Stylus Construction: Bonded Diamond
  • Frequency Response: 20Hz to 20kHz
  • Channel Separation: >18dB
  • Channel Balance: 2.5dB
  • Vertical Tracking Angle: 20 degrees
  • Supported Load Impedance: 47k ohms
  • Output Voltage: 2.5mV (1kHz, 3.54cm/sec.)
  • Stylus Pressure: 3.5g +/–0.5g
  • Cartridge Weight: 5g +/–0.5g
  • Head-shell Weight: 10g (including Screws, Nuts and Wires)